Friday, December 10, 2010 3:58:44 PM

HO scale flat rate shipping $7.95 Any size order!
G scale flat rate shipping $10.95 Any size order!
Reserve Future Releases - no deposit required!
Canada and Overseas shipping - actual Priority Mail Cost
NCE DIGITAL DECODERS

HOGTRAINZ.COM

LISTEN FOR THE BEST DEALS IN HO AND G SCALE TRAINS

THE ONE AND ONLY SOURCE FOR THE SERIOUS MODELER/COLLECTOR

NCE - HO SCALE DECODERS & EQUIPMENT

Description
Item Number
Price Qty to
Order
Add
Item

Dimensions.625" x 1.25" x .375"

1.25" x .64" x .29"     32 x 16 x 7.5 mm     Do not exceed DCC track voltage of 15v.

The Small Sized NH will allow a typical HO locomotive to travel over a dirt clod that is 3 feet long if needs be.

Still operating the lights with NO FLICKER!

NO HALT ADD ON MODULE
NCE-148

$20.95
LIST: $27.95

NEW! SWITCH8 MK2

Control for 8 Tortoise switch machines - Remembers the position of switch during power outages - Supports the full range of DCC accessory addresses (1-2044) - Easy address programming, no need to connect it to programming track - Connect optional "Button Board" for local push button control - Simple hook up, 2 wires to the track, 2 wires to each switch machine

SWITCH 8 MK2
NCE-151

$48.95
LIST: $69.95

NEW! BUTTON BOARD

Up to 16 push buttons can be added to Switch8-Mk2 - Accomodate N.O. Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2

BUTTON BOARD
NCE-152

$19.95
LIST: $29.95

NEW!

Now shipping - DCC Twin - NCE's new starter set that provides TWO train controls right out of the box. The Twin includes an internationally approved 3 Amp (42 Watt) power supply. A Cab Bus expansion connector allows you to add additional throttles.
TWIN CONTROL STARTER SET
NCE-46

$112.00
LIST: $159.95

User-friendly sets include everything to get two DCC controlled trains running (except power transformer). Choose standard plug-in or wireless radio cab. ProCab throttles walk you through operation with clearly labeled buttons and menu prompts in plain English on back lit LCD displays. Sets include ProCab throttle, Command Station with integral 5 amp power unit and system reference manual with quick start guide. NOTE: Requires 15V, 5 Amp, AC power supply, (#524-215) sold separately.
PH-PRO Power Pro w/Command Station, Booster, ProCab, Manual & Wire 5 AMP STARTER SET
NCE-1

$365.00
LIST: $529.95

PH-PRO-R - Power Pro w/Wireless 916 MHz Radio Throttle & RB01 Base Station
NCE-2

$489.00
LIST: $699.95

PB5 - 5 AMP BOOSTER - An updated version of our 5 Amp PB105 booster (it looks the same) but now includes our P514 power supply
NCE-45

$139.00
LIST: $199.95

PB110 - 10 Amp w/Automatic Reverse Loop Capability
NCE-5

$189.00
LIST: $269.95

PB110 - 10 Amp POWERHOUSE DCC SYSTEM
NCE-6

$475.00
LIST: $649.95

PH10R - 10 Amp POWERHOUSE DCC SYSTEM W/RADIO
NCE-7

$579.00
LIST: $849.95

Power Pro Command Stations -- CS02 - Command Station Only (No Cab, Booster or Decoders) "
NCE-8

$169.00
LIST: $239.95

ProCab - With Backlit LCD - WALKAROUND
NCE-10

$109.00
LIST: $159.95

ProCabR - With Backlit LCD - WITH RADIO WALKAROUND
NCE-11

$182.00
LIST: $249.95

TheCab04 uses a more conventional knob for speed control and is available with either a potentiometer (Cab04p) or digital encoder (Cab04e). Both varieties of the Cab04 can be set to YARD mode. Yard mode makes the speed knob act as a "center off" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn it to the left and speed will decrease until it gets to zero then it will start to increase speed in the reverse direction the farther you turn it to the left.

CAB-04p INTERMEDIATE CAB
NCE-12

$62.95
LIST: $89.95

The Cab04 and Cab05 are our most popular engineer cabs. Both cabs feature easy selection of locos/consists, single button operation of all decoder functions, momentary HORN button. Selection and control of individual or entire routes through turnouts (via the MACRO key), and our unique OPTION button that can be programmed to act as any button you wish, even those found on a much larger cab. The Cab04pR, Cab04eR and Cab05 R are available as radio equipped.

CAB-04pr - CAB-04p w/radio walkaround
NCE-13

$125.95
LIST: $179.95

TheCab04 uses a more conventional knob for speed control and is available with either a potentiometer (Cab04p) or digital encoder (Cab04e). Both varieties of the Cab04 can be set to YARD mode. Yard mode makes the speed knob act as a "center off" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn it to the left and speed will decrease until it gets to zero then it will start to increase speed in the reverse direction the farther you turn it to the left.

CAB-04E - INTERMEDIATE CAB WITH DIGITAL ENCODER
NCE-14

$84.95
LIST: $119.95

CAB-04ER - INTERMEDIATE CAB WITH RADIO
NCE-15

$139.95
LIST: $199.95

The Cab04 and Cab05 are our most popular engineer cabs. Both cabs feature easy selection of locos/consists, single button operation of all decoder functions, momentary HORN button. Selection and control of individual or entire routes through turnouts (via the MACRO key), and our unique OPTION button that can be programmed to act as any button you wish, even those found on a much larger cab. The Cab04pR, Cab04eR and Cab05 R are available as radio equipped.

CAB-05 - INTERMEDIATE CAB WITH BUTTONS
NCE-16

$62.95
LIST: $89.95

CAB-05-R - INTERMEDIATE CAB WITH RADIO
NCE-17

$126.95
LIST: $179.95

NCE Model #524-022 PH-Box Power Pro 5 Amp DCC Command Station/Booster Box. Use to upgrade the Power Cab 2 Amp starter system for more power and command capability. Handheld Cab not included.

PH-Box includes:

  • PowerPro Command Station/Booster
  • Connecting cable
PH-BOX POWER PRO 5 AMP DCC COMMAND STATION BOOSTER BOX
NCE-022

$244.95
LIST: $349.95

RB-02 WIRELESS BASE STATION
NCE-023

$109.00
LIST: $159.98

NCE-025 Power Cab DCC System by NCE (North Coast Engineering). A complete high-end 2-Amp DCC system in one compact hand-held throttle. Operates trains, lights, sounds and more. Includes manual, cables and power supply - nothing else to buy.

An entire DCC system in the palm of your hand!

The cab provides all of the capability and ease of use of the Power Pro system, but at an entry level price. Installation is a snap. Hook two wires to your track, plug in the cab and you're off and running trains! The only entry-level system with full featured programming track. And, the Power Cab doubles as a regular Deluxe Pro Cab if you operate at a layout with a larger NCE DCC system.

Power Cab 2 amp DCC System with Power Supply
NCE-25

$137.98
LIST: $199.99

Model SB5 5-Amp Smart Booster by NCE. Replaces the PCP to upgrade your Power Cab DCC system to 5 amps of power. Includes #524-238 P514 5-amp power supply. Additional 5-Amp boosters (DB5) may be added to the SB5 for even more power handling on larger layouts (sold separately). The SB5 does not have a programming track output (can program on the Main).

SB5 5 AMP BOOSTER FOR POWER CAB
NCE-27

$154.95
LIST: $219.95

The DB5 Booster adds an additional 5 Amp section of power to your DCC
railroad.
The DB5, 5 Amp booster may be added to the SB5 for more power handling on
larger layouts.
This manual covers only the addition and installation of the DB5 to an SB5
system. For operation of DCC, consult your system manual.
Use only the power supply included with the SB5. Use of another supply will
void the warranty.

DB5 5 AMP BOOSTER
NCE-28

$124.95
LIST: $179.95

Intermediate Cab Radio
4 digit LED display, support for 29 functions, up to 6 recalls, control individual accessories as well as macros.

INTERMEDIATE CAB 06R
NCE-40

$132.45
LIST: $189.95

D13SR - 3 EFX Function Outputs, Measures 1.65 x .63 x .12"
NCE-100

$15.25
LIST: $19.95

D13SR - 4-Pack #100 w/3 EFX Function Output
NCE-101

$52.00
LIST: $74.95

D13SRP- With 8 Pin NMRA Plug
NCE-102

$18.95
LIST: $25.95

D14SRP- SILENT RUNNING 6 FUNCTION With 8 Pin NMRA Plug
NCE-103

$22.00
LIST: $29.95

D15SR - Silent RunninG 1.3 Amp Decoder- 5 EFX Function Outputs, 1.1 x .63 x.25" 9 Pin Plug & Harness
NCE-104

$22.00
LIST: $29.95

D15SRP - Silent Running(TM) 1.3 Amp Decoders -- D15SR - 5 EFX Function Outputs, 1.1 x .63 x.25" 9 Pin Plug & Harness
NCE-105

$25.75
LIST: $35.95

DA-SR - Solder-In, 4 EFX Outputs for Kato Drive & Athearn Genesis
NCE-106

$18.95
LIST: $24.95

DA-SR - Solder-In, 4 EFX Outputs for Kato Drive & Athearn Genesis - 4 PACK
NCE-107

$60.95
LIST: $89.95

P2K-SR - Direct Plug-In, 4 EFX Outputs for Life-Like GP7, 9, 30 & SD60
NCE-108

$22.00
LIST: $29.95

SW9-SR - 3 EFX for Life-Like SW8, SW9, SW900 & SW1200
NCE-110

$22.00
LIST: $29.95

D13SR - 10-Pack #100 w/3 EFX Function Outputs
NCE-121

$125.00
LIST: $174.95

D13SRJ - 4 Function w/9 Pin Plug
NCE-124

$15.25
LIST: $19.95

D13SRJ - 4 Function w/9 Pin Plug 4 PACK
NCE-125

$52.00
LIST: $74.95

BACH-DSL, Replacement Decoder f/Bachmann "DCC ON BOARD" Diesels
NCE-139

$15.25
LIST: $19.95

D-13SRJ HO SCALE DECODER - 4 FUNCTION - 10 PACK
NCE-145

$122.49
LIST: $174.95

Direct plug-in to Athearn and other locomotives equipped with NMRA 9 pin DCC "Quick Plug" with small no halt module installed

D13NHJ DECODER - Athearn and locos equipped with NMRA 9 pin "Quick Plug"
NCE-146

$34.25
LIST: $46.95

SWITCH-KAT FOR REMOTE CONTROL OF KATO SWITCH MACHINES
NCE-116

$17.49
LIST: $24.95

BD-20 BLOCK DETECTION FOR DCC
NCE-205

$10.98
LIST: $14.98

UTP PANEL CAB BUS W/RJ12 CONNECT
NCE-207

$14.98
LIST: $19.98

COILCORD - R6 6' CABLE RJ12 CONNECTOR
NCE-209

$7.99
LIST: $9.99

COILCORD-DIN 7' COILED CORD
NCE-210

$13.49
LIST: $18.98

PLUG PACK NMRA 8 PIN PLUGS (10 PK)
NCE-211

$11.25
LIST: $15.95

HIGH GAIN ANTENNA 900 MHZ
NCE-212

$12.25
LIST: $16.95

RJ12-7 CABLE FOR UTP/DIN PANEL
NCE-213

$5.25
LIST: $6.95

RJ12-7 12' CABLE FOR UTP/DIN PANEL
NCE-214

$6.25
LIST: $7.95

RJ12-7 40' CABLE FOR UTP/DIN PANEL
NCE-220

$17.25
LIST: $22.95

P114 13.5V 2 AMP POWER SUPPLY
NCE-221

$20.95
LIST: $29.95

Model #524222 UTP Cab Power Panel for the Power Cab DCC System by NCE. Shown with the included 1/16" thick aluminum, black anodized fascia plate. Adds a separate PCP panel to operate your Power Cab in other places or on other layouts. Use NCE RJ12 cables or similar (sold separately).

PCP POWER CAB POWR PANEL
NCE-222

$15.25
LIST: $21.95

COMPUTER INTERFACE TO USB
NCE-223

$34.25
LIST: $49.95

P-1018 18 VOLT AC 10 AMP POWER SUPPLY
NCE-224

$74.25
LIST: $99.95

EB1 1 CIRCUIT PROTECTOR
NCE-225

$22.25
LIST: $29.95

The Auxiliary Input Unit provides connection of block occupancy detectors, switch position relays, etc. for purposes of signaling and/or computer control of your layout. Simply plugs in to the Cab Bus.

AUXILIARY INPUT UNIT
NCE-200

$34.95
LIST: $49.95

UTP-CAT 5 PANEL
NCE-234

$14.95
LIST: $19.95

Decoder Test Kit. Perfect companion to DCC installation and operation, the decoder tester works with ANY DCC decoder. Test for motor forward and reverse, functions 0F, 0R, 1, and 2.

DECODER TEST KIT
NCE-DTK

$17.95
LIST: $24.95

P515 15vt 5 AMP POWER SUPPLY
NCE-215

$39.25
LIST: $59.95